Installation locations

The installation places for heat and cold meters can be very different. Depending on nominal width, flow velocity, and operating temperature, different accessories or installation sets are needed. A distinction is also made between direct installation of the temperature probes and installation in immersion sleeves.

Our installation locations for heat and cold meters

902440_Schutzhuelsen_Waermemengenzaehler.tif - for heat meter temperature probes

Thermowells

for heat meter temperature probes Basic type: 902440

Insertion length 35 or 120 or 400 mm
Max temp.: 105/150/180 °C
Stainless steel or brass protection tube

902442_Schutzhuelsen_Waermemengenzaehler.tif - for temperature probes

Installation locations and accessories

for temperature probes Basic type: 902442

Max. temp.: 150 °C
PN = 16 bar
Accessories: sealing sets, extension socket

Documents for your planning

Heating and air-conditioning technology

Download

Temperature

Download

Optimum installation for accurate measurement results

Ideal positioning of temperature probe pairs with installation locations from JUMO

JUMO provides the ideal installation locations through immersion sleeves, ball valves, valves, and much more to place the temperature probe pairs at the right location in the process. This is done to protect the RTD temperature probes and to create ideal measurement conditions.

Your contact

Industry Manager Temperature Probes for Heat Meter

JUMO AS Norge +47 67 97 37 10 info.no@jumo.net +47 67 97 37 10