The JUMO dTRANS T07 device series is a two-channel temperature transmitter with HART® communication. The devices are available in 2 versions: for installation in a B-head or for DIN-rail mounting. The versions with Ex and SIL approval for SIL 2/3 enable reliable use.
| general technical data | |
|---|---|
| Galvanic isolation | 2 kV |
| Installation | In terminal head form B or on mounting rail/DIN rail 35 × 7.5 mm |
| RTD temperature probe input | Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Cu50, Cu100, two-wire/three-wire/four-wire circuit |
| Thermocouple input | A,B,C,D,E,J,K,L,N,R,S,T,U |
| Ambient temperature | -40 to +85 °C |
| Output | 4 to 20 mA (invertible) |
| Special features | 2 universal measurement inputs (RTD, TC, Ω, mV), high degree of accuracy (0.1 K with Pt100 sensor), output 4 to 20 mA (one-channel loop powered), HART® 7 protocol, SIL 2/SIL 3 hardware/software according to IEC 61508, reliable measuring mode due to sensor monitoring and device hardware error detection, optional plug-in display BD7 for B-head device version |
| NAMUR compliant | NE 43 and NE 89 |
| Voltage supply | DC 11 to 42 V (without SIL and Ex approval) |
| Calibration accuracy | ± 0.05 % |
| Configuration | Via HART® modem with JUMO DTM or HART® communicator with JUMO DD |
| Approval | ATEX/IECEx, SIL, cULus |
No related documents found.
We will assist you with your project and provide you with an offer tailored to your personal needs.
Team Sales
We care about your problems and will find solutions for you. We are also the contact persons for startup, repair, maintenance and calibration.
Team Service
